FICTIONAL SAMPLE - Contoso Renewables, Quellmoor Ridge Wind Farm and every organisation, person, product and value in this wiki are invented. Not for operational use.

A6101 Grid voltage out of range is an alarm code recorded for WTG-01 through WTG-12 in the SCADA alarm and status log.1234567891011121314151617181920212223242526272829303132 The log shows A6101 alarms and corresponding S510 Stopped - fault status entries, with clear entries also recorded.333435361234567891011121314151617181920212223242526272829303132

Facts

  • On 2026-04-20, A6101 Grid voltage out of range cleared at 99.6 %, with corresponding S510 Stopped - fault END entries recorded between 20:49:12 and 20:55:06.33343536
  • On 2026-06-06, A6101 Grid voltage out of range alarms were raised across WTG-01 through WTG-12 with value 87.2 %, accompanied by S510 Stopped - fault START entries; later A6101 clear entries show value 99.6 % and S510 END entries.123456
  • On 2026-06-18 at about 14:10, A6101 Grid voltage out of range alarms were raised on WTG-01 through WTG-12 at 89.2 %, with S510 Stopped - fault status starts recorded for each turbine in the same sequence.789101112131415161718
  • On 2026-08-02, A6101 Grid voltage out of range was raised for WTG-01 through WTG-12 with value 89.3 %, S510 Stopped - fault started, then the A6101 alarms cleared at 99.6 % and S510 ended.192021222324
  • On 2026-08-21, WTG-01 through WTG-12 raised A6101 Grid voltage out of range at 87.8 %, entered S510 Stopped - fault, then cleared A6101 at 99.6 % and ended S510.2526272829303132

Timeline

  • 2026-04-20: On 2026-04-20, A6101 Grid voltage out of range cleared at 99.6 %, with corresponding S510 Stopped - fault END entries recorded between 20:49:12 and 20:55:06.33343536
  • 2026-06-06: On 2026-06-06, A6101 Grid voltage out of range alarms were raised across WTG-01 through WTG-12 with value 87.2 %, accompanied by S510 Stopped - fault START entries; later A6101 clear entries show value 99.6 % and S510 END entries.123456
  • 2026-06-18: On 2026-06-18 at about 14:10, A6101 Grid voltage out of range alarms were raised on WTG-01 through WTG-12 at 89.2 %, with S510 Stopped - fault status starts recorded for each turbine in the same sequence.789101112131415161718
  • 2026-08-02: On 2026-08-02, A6101 Grid voltage out of range was raised for WTG-01 through WTG-12 with value 89.3 %, S510 Stopped - fault started, then the A6101 alarms cleared at 99.6 % and S510 ended.192021222324
  • 2026-08-21: On 2026-08-21, WTG-01 through WTG-12 raised A6101 Grid voltage out of range at 87.8 %, entered S510 Stopped - fault, then cleared A6101 at 99.6 % and ended S510.2526272829303132

Documents

Sources

Footnotes

  1. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 690 · table ↩ ↩2 ↩3 ↩4

  2. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 691 · table ↩ ↩2 ↩3 ↩4

  3. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 712 · table ↩ ↩2 ↩3 ↩4

  4. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 713 · table ↩ ↩2 ↩3 ↩4

  5. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 714 · table ↩ ↩2 ↩3 ↩4

  6. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 737 · table ↩ ↩2 ↩3 ↩4

  7. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 864 · table ↩ ↩2 ↩3 ↩4

  8. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 866 · table ↩ ↩2 ↩3 ↩4

  9. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 868 · table ↩ ↩2 ↩3 ↩4

  10. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 870 · table ↩ ↩2 ↩3 ↩4

  11. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 872 · table ↩ ↩2 ↩3 ↩4

  12. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 874 · table ↩ ↩2 ↩3 ↩4

  13. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 876 · table ↩ ↩2 ↩3 ↩4

  14. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 878 · table ↩ ↩2 ↩3 ↩4

  15. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 880 · table ↩ ↩2 ↩3 ↩4

  16. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 882 · table ↩ ↩2 ↩3 ↩4

  17. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 884 · table ↩ ↩2 ↩3 ↩4

  18. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 886 · table ↩ ↩2 ↩3 ↩4

  19. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1437 · table ↩ ↩2 ↩3 ↩4

  20. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1459 · table ↩ ↩2 ↩3 ↩4

  21. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1461 · table ↩ ↩2 ↩3 ↩4

  22. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1482 · table ↩ ↩2 ↩3 ↩4

  23. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1466 · table ↩ ↩2 ↩3 ↩4

  24. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1484 · table ↩ ↩2 ↩3 ↩4

  25. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1714 · table ↩ ↩2 ↩3 ↩4

  26. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1736 · table ↩ ↩2 ↩3 ↩4

  27. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1715 · table ↩ ↩2 ↩3 ↩4

  28. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1737 · table ↩ ↩2 ↩3 ↩4

  29. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1738 · table ↩ ↩2 ↩3 ↩4

  30. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1758 · table ↩ ↩2 ↩3 ↩4

  31. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1740 · table ↩ ↩2 ↩3 ↩4

  32. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 1761 · table ↩ ↩2 ↩3 ↩4

  33. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 236 · table ↩ ↩2 ↩3

  34. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 237 · table ↩ ↩2 ↩3

  35. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 258 · table ↩ ↩2 ↩3

  36. SCADA alarm and status log, 2026-04-01 to 2026-08-31 — row 259 · table ↩ ↩2 ↩3

Provenance badgestable values parsed deterministically from the cited table rows